Kenwood DPX-6100MD
Brand : Kenwood
Manual
Kenwood DPX-6100MD is a dual-size MD/CD receiver that achieves high cost performance. Equipped with a newly developed high-performance pickup and high-precision servo circuit, it can read music signals recorded not only on CD-R but also on CD-RW *2 . Equipped with 6-hole simulation preset DSP and 7-band 5-mode preset equalizer, you can easily enjoy realistic DSP sound. A 2-mode, 13-band spectrum analyzer is equipped on the large display unique to 2DIN. 9 patterns of spectrum analyzer patterns make the interior of the car fun. Built-in 47W x 4ch super high power amplifier.
*2: Playback of MP3 data is not supported.
[MD department]
- Frequency response: 20Hz to 20kHz (±1dB)
- S/N ratio: 90dB (1kHz)
- Dynamic range: 90dB
- Stereo Separation: 85dB
[CD section]
- Frequency response: 10Hz to 20kHz (±1dB)
- S/N ratio: 93dB (1kHz)
- Dynamic range: 93dB
- Stereo Separation: 85dB
[FM section]
- Receiving frequency range: 76.0MHz to 90.0MHz (100kHz steps)
[AM section]
- Receiving frequency range: 522kHz to 1629kHz (9kHz steps) Sensitivity: 28dBμ
[EQ section]
- Equalizer center frequency: 60, 160, 400, 1k, 2k, 6k, 16kHz
- Variable range: ±12dB
[Audio part]
- Maximum output: 47W x 4
- Rated output: 29W x 4 (4Ω, 1kHz, 10%THD)
- Pre-out level: 1500mV (FM/10kΩ)
[Common part]
- Power supply voltage: 14.4V (11 to 16V)
- Maximum current consumption: 10A
- Embedded dimensions: 178 (W) x 100 (H) x 155 (D) mm
- Mass: 2.9kg
Content adapted from: Kenwood Press Release
| Name | DPX-6100MD |
|---|---|
| Manufacturer | Kenwood |
| Released | 2000/05 |
| Device type | auto |
| Recorder | Player |
| MDLP | No |
| NetMD | No |
| Hi-MD | No |
| Radio | Yes |
| Dimensions | 2-DIN 178 (W) x 100 (H) x 155 (D) mm |
| Weight | 2900 |
| ATRAC ver | |
| Battery | |
| Battery notes | |
| Sidecar (depr) | |
| Voltage | 12 |
| Power cable | |
| Price (launch) | |
| ¥63 000 | |
| - | |
| Inputs | CD |
| Outputs | |
| Control |
